PS4 & PS5 · Marius Builder

Custom controllers, built on the Marius board.

Hand-assembled to spec around a Sony first-party controller — brand new on PS5, sourced parts on PS4. Pick your console and board, choose your sticks, layer the add-ons. Every modification is bench-validated after install. Prices in AUD, all-in.

02 · Build yours

Spec it up

Every option and every price. Tap ? beside anything to see what it is; the total updates as you go.

✓ INCLUDED
A Sony first-party controller — brand new on PS5, built from sourced parts on PS4 — rebuilt on the Marius board with updated firmware and calibration, plus the Gamepad Optimiser. Every build ships with free express delivery (AU-wide), a fitted hard case, and a verified 8K USB cable where we supply the controller. No surcharges.
⚠ Please read before ordering
  • PC only — will not work on consoles.
  • Demanding 8K polling: a PC with moderate specs is recommended. Polling rate can be reduced as required.
  • No gyro or touchpad functionality.
  • Wired only — battery removed, no Bluetooth.
  • No rumble function.
  • No audio jack.
  • This is an experimental board in early development. The occasional fault or quirk may exist, as with any product in development.
  • Build time is 4–6 weeks — it may be shorter or longer depending on the spec and the parts on hand.
  • 50% deposit required to commence your build; the remaining balance must be paid in full before any item is shipped.
Console
Board
Edition
Colour
Joysticks — choose one
Not sure? The thumbstick module guide compares all of them side by side — tension, drift warranty and price.
Add-ons
✓ One verified 8K cable is included with every build where we supply the controller — already in your total below.
Your build
    Total AUD$375

    50% deposit to start: $187.50 — balance before shipping.

    Build time 4–6 weeks — may be shorter or longer depending on the spec and parts on hand.

    Send this build

    Opens an email with your spec filled in — nothing is charged here. Free express delivery AU-wide, a hard case, and a verified 8K cable on builds we supply the controller for.

    Order & returns

    The terms, in plain sight

    Build time

    Builds take 4–6 weeks. That can be shorter or longer depending on the spec and what parts are on hand — PS4 and MIDAS builds are made to order and sit at the longer end. You’ll get a lead time with your confirmation.


    Deposit

    A 50% deposit is required to commence your build, with the remaining balance to be paid in full prior to shipment.


    Change of mind

    If you change your mind after the build has commenced, a 10% restocking fee of the total order value will be deducted from your deposit. If you change your mind after proof of dispatch (POD), a 20% restocking fee will be deducted from the total order value. In both cases, return shipping is at the customer's expense.


    Warranty

    All parts and labour are covered by a 12-month warranty from the date of shipment. The warranty does not cover:

    • Physical damage, including drops, liquid damage, or misuse
    • Modifications or repairs carried out by anyone other than Slightly Optimised
    • Normal wear and tear
    • Damage caused by use of third-party accessories or components

    BYO builds. Where you supply the controller, the warranty covers the parts we fit and the work we do — the Marius board, the modules, the shells and the assembly. It cannot cover the controller you supplied or any component reused from it, including any fault already present. A second-hand controller has a history we didn't see. We assess yours as suitable before starting and tell you if it isn't, but that is an assessment, not a guarantee of the parts we didn't supply. Nothing here limits your rights under Australian Consumer Law.


    PS4 builds

    New DualShock 4 controllers are no longer manufactured. Where we supply the controller for a PS4 build, it is assembled from hand-picked second-hand genuine Sony parts together with new aftermarket parts, inspected before assembly. The Marius board, the modules and every other part we fit are new. This does not apply to PS5 builds, or to a build using a controller you supply.


    Replaced parts

    Where you supply the controller, the parts we take out of it are still yours if you want them. Tell us before the build starts and we'll set them aside and send them back with the finished controller. Ask afterwards and we may no longer have them.


    Thumbstick drift

    Controllers fitted with ALPS potentiometer modules carry a 3-month warranty against drift, due to the mechanical nature of the component. Controllers fitted with Kalih Carbon, TMR, or Hall Effect modules carry the full 12-month drift warranty. For the modules offered in the builder:

    • ALPS — 3-month drift warranty
    • JS13 Pro+, RS13 v3 and JT13 (TMR) — 12-month drift warranty
    • Kalih Carbon — 12-month drift warranty
    • MIDAS Hall-effect modules — 12-month drift warranty

    Assessment

    Any controller returned under warranty will be inspected prior to assessment. Warranty claims found to be the result of the above exclusions will be declined, and a repair quote will be provided instead.


    Custom builds are made to your specification — please ensure all details are confirmed before your build begins. Nothing on this page limits your rights under Australian Consumer Law.

    FAQ

    Straight answers

    Will it work on my PlayStation?
    No. These are PC only. The Marius board replaces the controller's original electronics, so a console won't recognise it. It's built for PC players who want 8K polling and mouse-click inputs — if you need it to work on console, this isn't the right build.
    What do I lose compared to a stock controller?
    Gyro, the touchpad, rumble, the audio jack and Bluetooth — the board is wired-only and the battery is removed. That's the trade for the polling rate and the input work, and it's listed at the top of this page rather than buried in the small print.
    Which joystick modules should I pick?
    On 3-pin Marius builds, three are included in the base price: ALPS (the standard potentiometer module fitted to Sony first-party controllers), JS13 Pro+ (an FPS-proven TMR module) and RS13 v3 (the latest-revision Ginful TMR module). Two are a +$30 upgrade: JT13 (tension-adjustable TMR, based on the JS13 Pro+) and Kalih Carbon (an upgraded potentiometer module with longer service life and lower electrical noise than ALPS).

    The practical difference is drift: ALPS wears mechanically and carries a 3-month drift warranty, while the TMR modules and Kalih Carbon carry the full 12 months. One trade-off worth knowing before you pick: the JT13 takes no aftermarket thumbstick caps — neither the Edge-style nor the Leadjoy No.2 — because its tension-adjustment collar sits where the cap would go. If swappable caps matter more to you than adjustable tension, pick a different module. The 5-pin MIDAS build doesn't use this selector at all — it comes with Marius-designed Hall-effect modules as part of the build. Not sure which suits how you play? Ask us — it's a two-line answer, not a sales pitch.
    How do I pay, and when?
    A 50% deposit commences the build, and the balance is paid in full before it ships — we'll send you a link for the balance once your build is ready. Payment is through Stripe's secure checkout, in AUD — card, Apple Pay, Google Pay, or pay in instalments with Afterpay or Klarna. The full list is shown at checkout. Instalment plans apply to each payment separately: the deposit now, the balance when your build is ready. It isn't one plan spread across the whole build, and whether you're approved is between you and the provider. Need to arrange something different? Ask us before you order.
    How long does a build take?
    4–6 weeks as a rule, though it can be shorter or longer depending on the spec and what parts are on hand — PS4 and MIDAS builds are made to order and sit at the longer end. You'll get a lead time with your order confirmation.
    Do you ship outside Australia?
    Free express courier delivery is included Australia-wide. For anywhere else, get in touch and we'll sort shipping with you before you order.
    Are PS4 builds made from new controllers?
    No, and they can’t be — Sony no longer makes the DualShock 4, so there is no new one to buy.

    A PS4 build is assembled from hand-picked second-hand genuine Sony parts and new aftermarket parts. Everything is checked before it goes in, and the Marius board, the modules and anything else we fit are new regardless. That’s also why PS4 builds are made to order and sit at the longer end of the lead time: the parts have to be found first.

    PS5 builds are unaffected — those start as a brand-new DualSense. And if you send us your own DualShock 4, none of this applies: we rebuild the one you already own.
    What's the Gamepad Optimiser?
    A Windows utility that ships with every build, free.

    A controller at 8K asks a lot of the machine reading it, and an untuned Windows install will throw away part of what you paid for before it ever reaches the game. The Gamepad Optimiser handles that end — the system settings that decide how much of your input survives the trip. Nothing to buy, nothing to configure.

    It's a piece of our PC optimisation suite rather than a separate thing, so a build comes with the software that makes the most of it. The rest of the suite — the system scanner, the monitor and benchmark, the tuning tools — is in private beta.